Skylight

I hacked out the existing formers that were meant for fabric, and replaced them with 3x8 square tubing that matches the airfoil shape of the wing root.

I used a 1/2" square tube as the rear crossbar. Plexiglas or Lexan will cover the entire surface.

To do:

• Turn fuselage upside down and finish weld the formers to the posts.
• Fill the front round tube stubs while welding.
• Weld large stringer saddles onto crossbar.
• Weld tabs to inner formers
• Drill outer formers and rivnut
• Buy plexiglas