Skylight: Difference between revisions
From Bearhawk N813Z
No edit summary |
mNo edit summary |
||
| Line 9: | Line 9: | ||
*Fill the front round tube stubs while welding. | *Fill the front round tube stubs while welding. | ||
*Weld large stringer saddles onto crossbar. | *Weld large stringer saddles onto crossbar. | ||
* | *Weld tabs to inner formers | ||
*Drill outer formers and rivnut | |||
*Buy plexiglas | |||
[[File:January2016-skylight-welding-12.jpg]] | [[File:January2016-skylight-welding-12.jpg]] | ||
Revision as of 18:04, 23 January 2019
I hacked out the existing formers that were meant for fabric, and replaced them with 3x8 square tubing that matches the airfoil shape of the wing root.
I used a 1/2" square tube as the rear crossbar. Plexiglas or Lexan will cover the entire surface.
To do:
- Turn fuselage upside down and finish weld the formers to the posts.
- Fill the front round tube stubs while welding.
- Weld large stringer saddles onto crossbar.
- Weld tabs to inner formers
- Drill outer formers and rivnut
- Buy plexiglas
