Difference between revisions of "Grab handles"
From Bearhawk N813Z
(Created page with "Another BH builder commented that the handles on the tail of the aircraft were mounted too low, and were a back-breaker. I decided to mount some handles on the upper longerons...") |
(No difference)
|
Revision as of 09:38, 24 August 2018
Another BH builder commented that the handles on the tail of the aircraft were mounted too low, and were a back-breaker. I decided to mount some handles on the upper longerons for wrangling the aircraft.
These could be built by hand, but a good (read, mandrel-type) tubing bender capable of bending 5/8" steel tubing would be needed. I decided to buy the Maule part.
