Difference between revisions of "Skylight"
From Bearhawk N813Z
(Created page with "I hacked out the existing formers that were meant for fabric, and replaced them with 3x8 square tubing that matches the airfoil shape of the wing root. I used a 1/2" square...") |
m |
||
| (One intermediate revision by the same user not shown) | |||
| Line 9: | Line 9: | ||
*Fill the front round tube stubs while welding. | *Fill the front round tube stubs while welding. | ||
*Weld large stringer saddles onto crossbar. | *Weld large stringer saddles onto crossbar. | ||
| − | * | + | *Weld tabs to inner formers |
| + | *Drill outer formers and rivnut | ||
| + | *Buy plexiglas | ||
| − | + | [[File:January2016-skylight-welding-12.jpg]] | |
Latest revision as of 17:04, 23 January 2019
I hacked out the existing formers that were meant for fabric, and replaced them with 3x8 square tubing that matches the airfoil shape of the wing root.
I used a 1/2" square tube as the rear crossbar. Plexiglas or Lexan will cover the entire surface.
To do:
- Turn fuselage upside down and finish weld the formers to the posts.
- Fill the front round tube stubs while welding.
- Weld large stringer saddles onto crossbar.
- Weld tabs to inner formers
- Drill outer formers and rivnut
- Buy plexiglas
