Difference between revisions of "Elevator trim"
From Bearhawk N813Z
m |
m |
||
| Line 10: | Line 10: | ||
For driving the servo motors with the MEGA, a motor driver sub board is required: https://www.pololu.com/product/2519 | For driving the servo motors with the MEGA, a motor driver sub board is required: https://www.pololu.com/product/2519 | ||
| + | |||
| + | === Notes for handling input === | ||
| + | |||
| + | https://www.arduino.cc/en/pmwiki.php?n=Tutorial/AnalogInput | ||
Revision as of 10:25, 13 January 2021
Addition of a simple bracket to which to mount the electric trim servo on the underside of the elevator. Composite blister style fairing will cover the recessed servo. A push rod will emerge through a slot in the fairing and attach to the control horn on the trim tab.
ECU for trim
Per @akschu, using the Rugged MEGA-ET. This is an extended temp range model with better more rugged specs than the Arduino equivalent.
Bristol SG servo integrated position sensor can be read by its I/O pins.
For driving the servo motors with the MEGA, a motor driver sub board is required: https://www.pololu.com/product/2519