View source for Shoulder harness mods

The stock BH fuselage is equipped with a tab for mounting a 3-point harness setup, which is the diagonal-style like in a car.  Many of us prefer a 4-point setup like are common in Super Cubs, et al. 

The overhead crossbar/carry-through spar in the BH 4-place is nearly overhead the head of a taller pilot when his seat is positioned to accommodate.  The optimum angle for the shoulder harness straps is nowhere near achievable. For this reason, using a mount point for the inertia reel well aft of the pilot is preferable. But there's not much to choose from in the BH fuselage!

The solution, co-engineered with akschu, is to mount the reel directly behind the rear carry-through, routed the seatbelt webbing aft, then reverse direction on a newly-added crossbar, then forward to the pilot.

Using some new-old stock Schroth military 4-point harnesses, sourced [https://www.ebay.com/itm/Schroth-Military-Vehicle-4-point-Restraint-System-Seat-Belt-with-Retractor-NEW/272162965992 from ebay]. These are awesome quality; reels made by Amsafe.

[[File:Schroth-harnesses.jpg|1280px|frameless]]

=== Akschu pics ===

[[File:Signal-2024-08-04-225140 004.jpeg|800px|frameless]]
[[File:Signal-2024-08-04-225140 002.jpeg|800px|frameless]]
[[File:Signal-2024-08-04-225140 003.jpeg|800px|frameless]]